丁淑蓉

个人简介

上海市邯郸路220号复旦大学航空航天系

E-mail:dsr1971@163.com

Tel:02165642587

Fax:02165642742


1971年生。19937月于湖南大学工程力学系获工程力学专业理学学士学位,19964月于大连理工大学获计算力学专业硕士学位,20059月于天津大学获固体力学专业博士学位。19964月至19993月于大连理工大学工程力学系担任助教,19993月至20059月于天津大学力学系担任讲师、副教授(20056月受聘),20059月至20081月于复旦大学力学与工程科学系从事博士后研究,20081月至今任复旦大学力学与工程科学系副教授,20121月获博士生导师资格,20147月至20148月为美国西北太平洋国家实验室访问学者。现为中国力学学会反应堆结构力学专业委员会委员,中国力学学会青年工作委员会委员,中国复合材料学会力学专业委员会委员,上海市力学学会固体力学专业委员会委员,中山大学中法核工程与技术学院兼职教授。主持过国家自然科学基金面上和重大研究计划类项目、973项目子专题、国家重点实验室运行基金、以及来自科研院所的协作课题,并参加多项国家自然科学基金、国家863项目、教育部博士点基金和上海市科委项目。相关研究成果在国内外权威期刊或会议上发表论文60余篇。【详情请见个人主页

  

究兴趣

反应堆结构力学

复合材料力学

非线性力学

计算力学

细观力学

  

科研项目

[1]“弥散型核燃料元件辐照--力耦合特性研究”, 国家自然科学基金面上项目(负责)

[2]“弥散核燃料元件辐照损伤作用下的细观热力耦合行为研究”,国家自然科学基金面上项目(负责)

[3]“次锕系元素非均相核燃料燃烧演化的热力学行为多尺度模拟”,国家自然科学基金重大研究计划类项目(负责)

[4]“弥散燃料元件堆内辐照热-力耦合行为数值模拟技术研究”, 国家重点实验室运行基金 (负责)

[5]“板型燃料组件辐照热-力学行为数值模拟技术研究”, 科研院所协作项目(负责)

[6]“弥散型核燃料元件的辐照力学行为研究”,上海市博士后基金 (负责)

[7]“全局物态方程模型及数据计算测试”,科研院所协作项目(负责)

[8]“颗粒流散裂靶结构的辐照热力学行为研究”,科研院所协作项目(负责)

[9]“核燃料元件微动损伤分析和预测的关键技术研究”,国家科技部863课题(骨干参与)

[10]“核燃料中裂变气体力-热耦合扩散与渗流行为研究”,教育部博士点基金(骨干参与)

[11]“弥散型核燃料元件的力学可靠性研究”, 上海市自然科学基金项目(骨干参与)

[12]“弥散型核燃料元件优化设计与可靠性分析及计算软件包的研制”,上海市浦江人才计划项目(骨干参与)

[13]“热塑性复合材料层合板亚临界损伤的细观力学行为研究”,国家自然科学基金项目(骨干参与)

[14]“松花江特大桥钢构连接墩梁固结点的光弹实验分析与有限元分析”,科研院所协作项目(骨干参与)


代表论文  

[1] Yunmei Zhao, Xin Gong, Shurong Ding*, Simulation of the irradiation-induced thermo-mechanical behaviors evolution in monolithic UMo/Zr fuel plates under a heterogeneous irradiation condition, Nuclear Engineering and Design, 2015, 285:86-97. 

 [2] Yi Cui, Shurong Ding*, Zengtao Chen, Yongzhong Huo, Modifications and applications of the mechanistic gaseous swelling model for UMo fuel, Journal of Nuclear Materials, 2015, 457:157-164.

[3] Xin Gong, Yijie Jiang, Shurong Ding*, et al., Simulation of the in-pile behaviors evolution in nuclear fuel rods with the irradiation damage effects, Acta Mechanica Solida Sinica, 2014, 27(6):551-567. 

[4] Xin Gong, Yunmei Zhao, Shurong Ding*A new method to simulate the micro-thermo-mechanical behaviors evolution in dispersion nuclear fuel elements, Mechanics of Materials, 2014, 77:14-27.SCI/EI

[5] Yunmei Zhao, Xin Gong, Shurong Ding*, Yongzhong Huo, A numerical method for simulating the non-homogeneous irradiation effects in full-sized dispersion nuclear fuel plates, International Journal of Mechanical Sciences, 2014, 81:174-183.SCI/EI

[6] Xu HongbinDing Shurong *Huo YongzhongCoupled Thermo-mechanical FEM Simulation of Multi-pass Vertical-Horizontal Rolling Process, Advanced Materials Research, Vols.941-944,2014; ISSN:1022-6680.EI

[7] Shurong Ding*, Yunmei Zhao, Jibo Wan, et al., Simulation of the irradiation-induced micro-thermo-mechanical behaviors evolution in ADS nuclear fuel pellets, Journal of Nuclear Materials, 2013, 442(1-3): 9099.SCI/EI)

[8] Yi Cui, Shurong Ding*, Yongzhong Huo ,et. al, 2013, An efficient numerical method for intergranular fission gas evolution under transient with piecewise boundary resolution, Journal of Nuclear Materials, Volume 443,Issues 1-3, pages 570-578. (SCI/EI)

[9] Xin Gong, Shurong Ding*,Yunmei Zhao, et.al, 2013, Effects of irradiation hardening and creep on the thermo-mechanical behaviors in inert matrix fuel elements, 2013, Mechanics of Materials, Volume 65, Pages 110–123. (SCI/EI)

[10] Yi Cui, Yongzhong Huo, Shurong Ding*, et. al, 2012, An analytical solution for simulation of the fission gas behaviors with time-dependent piece-wise boundary resolution, Journal of Nuclear Materials, Volume 424, Issues 13, May 2012, Pages 109-115 (SCI /EI).

[11] Yijie Jiang, Yi Cui, Yongzhong Huo, Shurong Ding*, Prediction of the micro-thermo-mechanical behaviors in dispersion nuclear fuel plates with heterogeneous particle distributions, 2011Journal of Nuclear Materials 418: 69-79. (SCI/ EI)

[12] Yijie Jiang, Yi Cui, Yongzhong Huo, Shurong Ding*, Three-dimensional FE Analysis of the thermal-mechanical behaviors in the nuclear fuel rods, 2011, Annals of Nuclear Energy 38: 2581-2593.(SCI/EI).

[13] Qiming Wang, Yi Cui, Yongzhong Huo, Shurong Ding*Simulation of the coupling behaviors of particle and matrix irradiation swelling and cladding irradiation growth of plate-type dispersion nuclear fuel elements2011Mechanics of Materials 43222–241. (SCI/EI)

[14] Yijie Jiang, Qiming Wang, Yi Cui, Yongzhong Huo, Shurong Ding*, Simulation of irradiation hardening of Zircaloy within plate-type dispersion nuclear fuel elements, Journal of Nuclear Materials, 2011, 413(2):76-89. (SCI/EI)

[15] Yijie Jiang, Yi Cui, Yongzhong Huo, Shurong Ding*, A method for 3D simulation of internal gas effects on thermal-mechanical behaviors in nuclear fuel elements, 2011,Nuclear Science and Techniques 22 (3):185-192 (SCI)

[16] Qiming Wang, Xiaoqing Yan, Shurong Ding*, Yongzhong Huo, Research on the interfacial behaviors of plate-type dispersion nuclear fuel elements , Journal of Nuclear Materials, 2010, 399(1): 41-54. (SCI /EI)

[17] Qiming Wang, Xiaoqing Yan, Shurong Ding*, Yongzhong Huo, Mechanical behaviors of the dispersion nuclear fuel plates induced by fuel particle swelling and thermal effect I: Effects of variations of the fuel particle volume fractions, Journal of Nuclear Materials, 2010, 400(2): 157-174. (SCI/EI)

[18] Shurong Ding, Qiming Wang, Yongzhong Huo, Mechanical behaviors of the dispersion nuclear fuel plates induced by fuel particle swelling and thermal effect II: Effects of variations of the fuel particle diameters, Journal of Nuclear Materials, 2010, 397( 1-3): 80-91. (SCI/EI)

[19] Qiming Wang, Yongzhong Huo, Shurong Ding* et.al, Numerical Study on the Thermal-elastoplastic Behaviors of Plate-type Dispersion Nuclear Fuel Elements, International Journal of Nonlinear Sciences and Numerical Simulation, 2010, 11(7): 477-487. (SCI)

[20] Ding, Shurong, Tong, J. W., Shen, M., Huo, Yongzhong Three-Dimensional Elastic-Plastic Analysis of the Interlaminar Stresses for the AS4/PEEK Composite Laminate with a Circular Hole Mechanics of Advanced Materials and Structures, 2010,17(6):406-418. (SCI/EI)

[21] Ding, Shurong, Tong, J. W., Wang, Z. Y., Huo, Yongzhong Fracture Characters and Damage Mechanism of the Notched AS4/PEEK Composite Laminate Journal of Thermoplastic Composite Materials, 2010, 23(5): 565-581. (SCI/EI)

[22] Shurong Ding, Yongzhong Huo, Xiaoqing Yan, Modeling of the Heat Transfer Performance of plate-type Dispersion Nuclear ElementsJournal of Nuclear Materials, 2009, 392(3): 498-504. (SCI/EI)

[23] Shurong Ding, Yongzhong Huo, Lin an Li, Effects of Fission Heat and Fuel Swelling on the thermal-mechanical Behaviors of Dispersion Fuel Elements, Mechanics of Advanced Materials and Structures, 2009, 16(7): 552-559. (SCI/EI)

[24] Xiaoqing Yan, Shurong Ding*, J.W. Tong, Yongzhong Huo, Elastic-plastic numerical simulation of the interlaminar stresses for the notched angle-ply thermoplastic composite laminate, Mechanics of Composite Materials, 2009, 45(3): 293-302. (SCI/EI)

[25] S. R. Ding, Y. Z. Huo, Finite element modeling of thermal-mechanical behaviors of dispersion fuel elements, Nuclear Technology, 2008, 163(3): 416-425. (SCI/EI)

[26] S. R. Ding, X. Jiang, Y. Z. Huo, L.A. Li, Reliability analysis of dispersion nuclear fuel elements, Journal of Nuclear Materials, 2008, 374(3): 453-460.SCI/EI.

[27] S. R. Ding, J. W. Tong, M. Shen, “Numerical simulation of elastic-plastic behavior of thermoplastic composites”, Journal of reinforced plastics and compositesApr. 2005, v24, n6, 2005, p649-655. (SCI/EI)

  

友情链接
联系我们
地址: 中国 上海市浦东新区张衡路825号复旦大学张江校区计算机楼
邮编: 201203
电话: +86-21-51355518 / +86-21-51355100
传真: +86-21-51355100
E-mail: dataology@fudan.edu.cn